Stretch film and pre-stretch unit tester programming site
Login is required!
THE PRE-STRETCH UNIT TESTER DEVICE DATA ANALYSIS SITE IS ONLY AVAILABLE BY USING THE PASSWORD ENCLOSED TO THE DEVICE!
INSTRUCTION FOR USE OF THE PAGE
Before the first use, you will have to do the correct system settings. The handbook contains a detailed guide for this. At every uploads, the system saves the data according to the current settings, so if you install the device on another machine, you must redo the settings before the uploading.The accuracy of the procession of collected data depends on the appropriate mounting and the correct settings! It is important to specify the data appropriately; otherwise you will get misleading results. If mounting is not correct, you will have incorrect incoming data from the very beginning.
Download the user manual
DATA UPLOAD
A measurement cycle must be selected and you will have to copy the entire data package into the upload window. This procedure will be far more simple with our application (Windows, MAC OS, Android and iOS) that will be completed in the near future.DATA ANALYSIS
All uploaded data can be checked in the "Measurement" menu and there is also a possibility to compare several selected measurements with the touch of a button. In case of single analysis, a packaging cycle can be checked on a complex diagram or in a chart, on the basis of raw data. You have the possibility to switch off certain curves for better review of the values.In case of comparative analysis, the total pre-stretches are compared to each other on a diagram.